A loft bed is a great use of space in a child’s room. Here are some tips for making your own…
Tips:
1
I spent $110 in supplies for this bed, not including the slide (it was stolen from our swingset!)
2
Draw your bed to scale on graph paper. Make a list of all the supplies you anticipate needing before you go shopping. You don’t want to make a dozen trips to the hardware store!
3
I checked prices on every item at both Lowe’s and Home Depot. They were very comparable, except Lowe’s had REAL wood shelving, primed, complete with bull-nosed edging, for LESS than the compressed laminate shelving. They came in 6 and 8 foot lengths and were surprisingly inexpensive.
4
The slats on the railing are made of furring strips cut in half lengthwise. The strips come in 8 foot segments and are only a couple bucks a piece.
How to:
made with
wooden board
table saw
This bed is extremely custom because we had to make some adaptations for some built-in features that the room had. But I can give you some tips that will help with your planning process:
1
It’s helpful to paint all the wood before you start cutting. Yes, there will be small portions that you won’t end up using, and you’ll need to make some touch-ups over the nails. But it’s easier than trying to paint between the railings, and painting the “ceiling” on your knees.
2
Consider adding a length of baseboard moulding as trim. It gives the bed a polished look.
3
Don’t even attempt this project unless you have the proper power tools. You do NOT want to try this with only a handsaw!
4
You don’t have to make the platform the same dimensions as the bed. Mine is actually wider and longer, because I wanted a bigger space underneath.
5
I kept in mind that we will want to update the carpet in this room within a couple of years– I did not want to take the entire bed apart to do it! So the bed is actually self-supporting on the walls; the bookshelves have one screw each for stability, but remove that and they can be tipped and slid out.
6
A desk is easy to throw in if you add furring strips to the wall and the back of a bookshelf. It’s just a board that slides in and out.
7
The chalkboard beneath the slide is actually Chalkboard Contact Paper, I bought it from a shop on Amazon for about $10 including shipping. It works great and is perfect for outfitting a custom space. Just be sure to “prime” the paper first by rubbing chalk ALL over it, then erasing. I am really pleased with this product.
8
Don’t forget to add a curtain. Hang it on a tension rod and it will fit any space.
Finally, if you’re planning on building a loft bed, I would definitely recommend checking out the site AnaWhite.com (formerly Knockoff Wood. There are so many great ideas there! Good luck and have fun!
Made By Marzipan may have received product or payment for this post. Posts may contain affiliate links. Disclosed in accordance with the Federal Trade Commission's 16 CFR, Part 255.
Finished?
Show it off!
